BV BN80

Seal Information (BV BN80) | |
---|---|
Block Vee – Symmetrical U-Cup
Block Vee Style U-Cups, also referred to as Huva Cup, Pruva U-Cups and 84 Series U-Cups, are very popular in industrial cylinders and can be used as piston or rod seals. Back-up rings are available and required for use above 500 PSI. When used with back-up rings, system pressure should not exceed 2,500 PSI. |
|
MATERIAL : | BUNA-N RUBBER |
TEMPERATURE RANGE : | -70°F (-57°C) TO +250°F (121°C) Depending on compound |
PRESSURE RANGE : | Varies based on Diametrical Clearance (See Chart) |
PART NUMBER : | (BV) – (IDxC/S-HGT)-(BN80) |
Chemical Compatibility : |
– Water – Aliphatic Hydrocarbons (petroleum oils, mineral oil, mineral grease, diesel fuel, fuel oils, butane, propane, natural gas) vegetable oil & grease. – Dilute acids, alkali & salt solutions – HFB, HFA, & HFC Fluids |
Buna-N, also known as Nitrile rubber, NBR, and acrylonitrile butadiene rubber, is a synthetic rubber copolymer of acrylonitrile (ACN) and butadiene. One of the most commonly used compounds in Hydraulics and Pneumatics. |
Array