O-RING CORD MORC VT75-VT90
| Seal Information (O-RING CORD MORC VT75-VT90) | |
|---|---|
| MATERIAL : | FLUOROCARBON (FKM) |
| TEMPERATURE RANGE : | -15°F (-26°C) TO +400°F (204°C) Depending on compound |
| PRESSURE RANGE : | Varies based on Diametrical Clearance (See Chart) |
| PART NUMBER : | (MOR) – (C/S)(VT75-VT90) |
| Chemical Compatibility : | – Water and steam – Aliphatic Hydrocarbons (petroleum oils, mineral oil, mineral grease, diesel fuel, fuel oils, butane, propane, natural gas) vegetable oil & grease. – Aromatic hydrocarbons (toluene, benzene) – Fuels, and fuels with methanol – Chlorinated hydrocarbons (trichlorethylene & carbon tetrachloride) – Non-flammable hydraulic fuels-HFD – Silicone oils & grease – Very good ozone & weather-aging resistance – High vacuum |
| Fluorocarbon, also known as FKM, FPM in Europe, and Viton ® are rubber compounds frequently used to resist extreme temperatures and harsh chemicals. The strong carbon-fluorine bonds that make up the polymer structure provide high thermo-chemical resistance, giving excellent aging characteristics, such as low compression set at elevated temperatures. | |
Total: 21
| Product | Cross Section | C Nom Hgt | STOCK | |
|---|---|---|---|---|
| MORC-1.6 VT75 | 1.6MM | 1.6MM | *1-3 Days | |
| MORC-10.0 VT75 | 10.0MM | 10.0MM | *1-3 Days | |
| MORC-11.0 VT75 | 11.0MM | 11.0MM | *1-3 Days | |
| MORC-12.0 VT75 | 12MM | 12MM | *1-3 Days | |
| MORC-13.0 VT75 | 13.0MM | 13.0MM | *1-3 Days | |
| MORC-2.0 VT75 | 2.0MM | 2.0MM | *1-3 Days | |
| MORC-2.4 VT75 | 2.4MM | 2.4MM | *1-3 Days | |
| MORC-2.5 VT75 | 2.5MM | 2.5MM | STOCK | |
| MORC-3.0 VT75 | 3.0MM | 3.0MM | *1-3 Days | |
| MORC-3.5 VT75 | 3.5MM | 3.5MM | *1-3 Days | |
| MORC-4.0 VT75 | 4.0MM | 4.0MM | *1-3 Days | |
| MORC-4.5 VT75 | 4.5MM | 4.5MM | *1-3 Days | |
| MORC-5.0 VT75 | 5.0MM | 5.0MM | *1-3 Days | |
| MORC-5.7 VT75 | 5.7MM | 5.7MM | *1-3 Days | |
| MORC-6.0 VT75 | 6.0MM | 6.0MM | *1-3 Days | |
| MORC-6.5 VT75 | 6.5MM | 6.5MM | *1-3 Days | |
| MORC-7.0 VT75 | 7.0MM | 7.0MM | *1-3 Days | |
| MORC-7.5 VT75 | 7.5MM | 7.5MM | *1-3 Days | |
| MORC-8.0 VT75 | 8.0MM | 8.0MM | *1-3 Days | |
| MORC-8.4 VT75 | 8.4MM | 8.4MM | *1-3 Days | |
| MORC-9.0 VT75 | 9.0MM | 9.0MM | *1-3 Days |
* This is an estimated delivery time, all delivery times may vary depending on factory lead times. A confirming sales order will be sent to you with updated delivery information when necessary.